QSS Network Service Debug Tool version 1.0.0
Copyright (C) 2002 Noritsu Koki Co.,Ltd.

===============================================

File List
	QSS_CLIENT.exe				Debug Tool Program
	QssOpt.dll					QSS Network Service DLL
	debug tool op manual.pdf	Operation Manual

	** !Caution **
	Some PDF documents may request to install Japanese Font Set. In case,
	please download the set on Adobe Web Site.

Operating environment
	Followings are the minimum requirements for installation of Debug Tool software.
	Monitor: Resolution of 1024 x 768
	PC: PC/AT compatible machine
	CPU: Pentium II 300MHz or compatible processor
	Memory: 64 Mbyte
	HDD free space: 5 Mbyte
	OS: Windows 98/98SE/Me/NT4.0/2000l
	LAN card: one that supports the above OS
	Protocol: TCP/IP

Installation procedure
	Follow the procedure below in order to install Debug Tool software.
	1. Create a folder and name it with alphanumerical value (e.g. gQSS_CLIENTh) in any drive on the PC where the Debug Tool software is to be installed.
	2. Place the media that includes Debug Tool software to the corresponding drive.
	3. Display the contents of the media by using Explorer or the equivalent.
	4. Select all the files in the media and copy them into the folder you have just created (in this case, C:\QSS_CLIENT).
	5. Release the read-only attribute of all the files in the folder you have just copied into, in this case, C:\QSS_CLIENT.

Start up Debug Tool software
	Follow the procedure below in order to start Debug Tool software.
	1. Display the contents of the folder, by using Explorer or the equivalent, where the Debug Tool software has been installed.
	2. Double-click on QSS_CLIENT.exe.
	3. Debug Tool will start and the menu screen will be shown.
	Proceed to g4. Preparation for debugging the QSS network serviceh.

Close down Debug Tool software
	Click gENDh in the Debug Tool menu screen so Debug Tool will close.


CHANGELOG
===============================================
05/31/2002		Version 1.0.0 release